Tag Archives: RevolveAsSolid

DesignScript Curve Translation, Geometry.Curve.RevolveAsSolid.ProfileAxis#36– Code to Node to Code

Hi Everyone: This is the thirty-sixth, in a series of forty-nine curve file translations. The file Geometry.Curve.RevolveAsSolid.ProfileAxis.ds is the third of eight Curve-Revolve file types and among those eight, the third of four Curve-Revolve-As-Solid files located in the DesignScript Editor (DSE) Sample files.

Geometry.Curve.RevolveAsSolid.ProfileAxis.ds

Geometry.Curve.RevolveAsSolid.ProfileAxis.ds

Open the DS Editor and copy the script generated from Geometry.Curve.RevolveAsSolid.ProfileAxis.ds. There is a slight discrepancy in this DS file from the Editor.

Geometry.Curve.RevolveAsSolid.ProfileAxis.ds#36-error

Geometry.Curve.RevolveAsSolid.ProfileAxis.ds#36-error

The highlighted start angle and sweep angle are not required in the RevolveAsSolid.ProfileAxis.ds node. This is a slight error which is more of a house keeping issue, but nonetheless an error. Onwards, run DS Studio, and paste the DSE script into the canvas.

Curve.RevolveAsSolid.ProfileAxis.ds

Curve.RevolveAsSolid.ProfileAxis.ds

The preliminary translation looks like the canvas shown above and the developed one below.

Geometry.Curve.RevolveAsSolid.ProfileAxis-36a

Geometry.Curve.RevolveAsSolid.ProfileAxis-36a

The red and yellow highlighted areas indicate the groupings of nodes according to their properties. Once satisfied that the translation is complete the “Node to Code” operation can take place.

Geometry.Curve.RevolveAsSolid.ProfileAxis-36b

Geometry.Curve.RevolveAsSolid.ProfileAxis-36b

The script that results from the operation doesn’t require further editing. The geometry that results from the codes(s) is shown below.

Geometry.Curve.RevolveAsSolid.ProfileAxis-Windows Graphic

Geometry.Curve.RevolveAsSolid.ProfileAxis-Windows Graphic

The files are available to download from the Drop-Box links below. Geometry.Curve.RevolveAsSolid.ProfileAxis#36 Geometry.Curve.RevolveAsSolid.ProfileAxis#36a Geometry.Curve.RevolveAsSolid.ProfileAxis#36b Thanks for looking. T!M

DesignScript Curve Translation, Geometry.Curve.RevolveAsSolid.AxisPointDirectionSweepAngle#35– Code to Node to Code

Hi Everyone:

This is the thirty-fifth, in a series of forty-nine curve file translations. The file Geometry.Curve.RevolveAsSolid.AxisPointDirectionSweepAngle.ds is the second of eight Curve-Revolve file types and among those eight, the second of four Curve-Revolve-As-Solid files located in the DesignScript Editor (DSE) Sample files.

Geometry.Curve.RevolveAsSolid.AxisPointDirectionSweepAngle.ds#35

Geometry.Curve.RevolveAsSolid.AxisPointDirectionSweepAngle.ds#35

Open the DS Editor and copy the script generated from Geometry.Curve.RevolveAsSolid.AxisPointDirectionSweepAngle.ds. Then run DS Studio, and paste the script into the canvas.

Geometry.Curve.RevolveAsSolid.AxisPointDirectionSweepAngle#35

Geometry.Curve.RevolveAsSolid.AxisPointDirectionSweepAngle#35

Make sure that the script is commented out as the code is translated into graph nodes, to avoid them running consecutively with each other. The preliminary translation looks like the canvas shown above and the developed one below,

Geometry.Curve.RevolveAsSolid.AxisPointDirectionSweepAngle#35a

Geometry.Curve.RevolveAsSolid.AxisPointDirectionSweepAngle#35a

The red and yellow highlighted areas indicate the groupings of nodes according to their properties. Once satisfied that the translation is complete enact the “Node to Code” operation.

Geometry.Curve.RevolveAsSolid.AxisPointDirectionSweepAngle#35b

Geometry.Curve.RevolveAsSolid.AxisPointDirectionSweepAngle#35b

The resulting script doesn’t require further editing. The geometry that results from the codes(s) is shown below.

Geometry.Curve.RevolveAsSolid.AxisPointDirectionSweepAngle#35-Graphic Window

Geometry.Curve.RevolveAsSolid.AxisPointDirectionSweepAngle#35-Graphic Window

A word of note, the commentary here is taken from a previous post and this was all done with the  Stand-Alone version of DesignScript. (DSS &DSE)

And with that, the files are available for downloading at the Drop-Box links below.

Geometry.Curve.RevolveAsSolid.AxisPointDirectionSweepAngle#35

Geometry.Curve.RevolveAsSolid.AxisPointDirectionSweepAngle#35a

Geometry.Curve.RevolveAsSolid.AxisPointDirectionSweepAngle#35b

Thanks for looking.

T!M

 

DesignScript Curve Translation, Geometry.Curve.RevolveAsSolid.AxisPointDirection#34– Code to Node to Code

 

Hi Everyone:

This is the thirty-fourth, in a series of forty-nine curve file translations. The file Geometry.Curve.RevolveAsSolid.AxisPointDirection.ds is the first of eight Curve-Revolve file types and among those eight, the first of four Curve-Revolve-As-Solid files located in the DesignScript Editor (DSE) Sample files.

Geometry.Curve.RevolveAsSolid.AxisPointDirection.ds#34

Geometry.Curve.RevolveAsSolid.AxisPointDirection.ds#34

Open the DS Editor and copy the script generated from Geometry.Curve.RevolveAsSolid.AxisPointDirection.ds. Then run DS Studio, and paste the script into the canvas.

Geometry.Curve.RevolveAsSolid.AxisPointDirection

Geometry.Curve.RevolveAsSolid.AxisPointDirection

Make sure that the script is commented out as the code is translated into graph nodes, to avoid them running consecutively with each other. The preliminary translation looks like the canvas shown above and the developed one below,

Geometry.Curve.RevolveAsSolid.AxisPointDirection#34a

Geometry.Curve.RevolveAsSolid.AxisPointDirection#34a

The red and yellow highlighted areas indicate the groupings of nodes according to their properties. Once satisfied that the translation is complete enact the “Node to Code” operation.

Geometry.Curve.RevolveAsSolid.AxisPointDirection#34b

Geometry.Curve.RevolveAsSolid.AxisPointDirection#34b

The resulting script doesn’t require further editing. The geometry that results from the codes(s) is shown below.

-Geometry.Curve.RevolveAsSolid.AxisPointDirection-Graphic Window

-Geometry.Curve.RevolveAsSolid.AxisPointDirection-Graphic Window

A word of note, the commentary here is taken from a previous post, and this was all done with the Stand-Alone Version of DesignScript.

And with that, the files are available for downloading at the Drop-Box links below.

Geometry.Curve.RevolveAsSolid.AxisPointDirection#34

Geometry.Curve.RevolveAsSolid.AxisPointDirection#34a

Geometry.Curve.RevolveAsSolid.AxisPointDirection#34b

Thanks for looking.

T!M