Tag Archives: #DesignScript Studio

Original pure DesignScript for architects and designers

#DesignScript – Geometry.Translate#6 – Code to Node to Code

Hi Everyone:

This is the last translation of all the DesignScript Sample files, with this one being the sixth and final file from the Geometry category of the DS Editor (DSE) Samples.

Geometry.Translate-ds#6

Geometry.Translate-ds#6

Open the file Geometry.Translate.ds in the DS Editor and run it. The script is shown below.

Geometry.Translate.ds#6

Geometry.Translate.ds#6

Now open DS Studio, copy & paste the DSE script, Geometry.Translate.ds into a blank canvas.

Geometry.Translate#a6

Geometry.Translate#a6

Note the highlighted commenting out which must be deleted in order to activate the code.

Geometry.Translate#a6-edited

Geometry.Translate#a6-edited

Now comment out the “(import(ProGeometry.dll)” script.  It can now be run as a Code Block of script, before the translation to Nodes takes place.

Geometry.Translate#6

Geometry.Translate#6

The preliminary translation is shown above, while the developed translation is shown below.

Geometry.Translate#6a

Geometry.Translate#6a

The red and yellow highlighted areas match the description and properties layout that is given to the script in the initial DS Editor *.ds file.

Geometry.Translate#6b

Geometry.Translate#6b

The “Node to Code” operation as shown above.

The geometry that results from the various code translations is shown below.

Geometry.Translate#6a-Graphic Window

Geometry.Translate#6a-Graphic Window

 

Liberty was taken with adding color as shown above in the graphic window.

DSS was run as a stand-alone application and the translation files are available to download from the DropBox links below.

Thanks for looking, it sure has been a different kind of design learning experience.

T!M

#DesignScript – Geometry.Translate.AlongVector#5 – Code to Node to Code

Hi Everyone:

This is the fifth of six DesignScript translations, from the Geometry category of the DS Editor (DSE) Samples.

Geometry.Translate.AlongVector-ds#5

Geometry.Translate.AlongVector-ds#5

Open the file Geometry.Translate.AlongVector.ds in the DS Editor and run it. The script is shown below.

Geometry.Translate.AlongVector.ds#5

Geometry.Translate.AlongVector.ds#5

Now open DS Studio, copy & paste the DSE script, Geometry.Translate.AlongVector.ds into a blank canvas.

Geometry.Translate.AlongVector#a5

Geometry.Translate.AlongVector#a5

Note the highlighted commenting out which must be deleted in order to activate the code.

Geometry.Translate.AlongVector#a5-edited

Geometry.Translate.AlongVector#a5-edited

Now comment out the “(import(ProGeometry.dll)” script.  It can now be run as a Code Block of script, before the translation to Nodes takes place.

Geometry.Translate.AlongVector#5

Geometry.Translate.AlongVector#5

The preliminary translation is shown above, while the developed translation is shown below.

Geometry.Translate.AlongVector#5a

Geometry.Translate.AlongVector#5a

The red and yellow highlighted areas match the description and properties layout that is given to the script in the initial DS Editor *.ds file.

Geometry.Translate.AlongVector#5b

Geometry.Translate.AlongVector#5b

The “Node to Code” operation as shown above.

The geometry that results from the various code translations is shown below.

Geometry.Translate.AlongVector#5a-Graphic Window

Liberty was taken with adding color as shown above in the graphic window.

DSS was run as a stand-alone application and the translation files are available to download from the DropBox links below.

Geometry.Translate.AlongVector#a5

Geometry.Translate.AlongVector#5

Geometry.Translate.AlongVector#5a

Geometry.Translate.AlongVector#5b

Thanks for looking.

T!M

#DesignScript – Geometry.Transform#4 – Code to Node to Code

Hi Everyone:

This is the fourth of six DesignScript translations, from the Geometry category of the DS Editor (DSE) Samples.

Geometry.Transform-ds#4

Geometry.Transform-ds#4

Open the file Geometry.Transform.ds in the DS Editor and run it. The script is shown below.

Geometry.Transform.ds#4

Geometry.Transform.ds#4

Now open DS Studio, copy & paste the DSE script, Geometry.Transform.ds into a blank canvas.

Geometry.Transform#a4

Geometry.Transform#a4

Note the highlighted commenting out which must be deleted in order to activate the code.

Geometry.Transform#a4-edited

Geometry.Transform#a4-edited

Now comment out the “(import(ProGeometry.dll)” script.  It can now be run as a Code Block of script, before the translation to Nodes takes place.

Geometry.Transform#4

Geometry.Transform#4

The preliminary translation is shown above, while the developed translation is shown below.

Geometry.Transform#4a

Geometry.Transform#4a

The red and yellow highlighted areas match the description and properties layout that is given to the script in the initial DS Editor *.ds file.

Geometry.Transform4b

Geometry.Transform#4b

The “Node to Code” operation as shown above.

The geometry that results from the various code translations is shown below.

Geometry.Transform#4a-Graphic Window

Geometry.Transform#4a-Graphic Window

Liberty was taken with adding color as shown above in the graphic window.

DSS was run as a stand-alone application and the translation files are available to download from the DropBox links below.

Geometry.Transform#a4

Geometry.Transform#4

Geometry.Transform#4a

Geometry.Transform#4b

Thanks for looking.

T!M

#DesignScript – Geometry.Intersect#3 – Code to Node to Code

Hi Everyone:

This is the third of six DesignScript translations, from the Geometry category of the DS Editor (DSE) Samples.

Geometry.Intersect-ds#3

Open the file  Geometry.Intersect.ds in the DS Editor and run it. The script is shown below.

Geometry.Intersect.ds#3

Geometry.Intersect.ds#3

Now open DS Studio, copy & paste the DSE script, Geometry.Intersect.ds into a blank canvas.

Geometry.Intersect#a3

Geometry.Intersect#a3

Note the highlighted commenting out which must be deleted in order to activate the code. It’s noted here that DesignScript Studio does not support class and function definitions as the program reports and shown below. We will create a work-around to accommodate this.

Geometry.Intersect#a3-edited

Geometry.Intersect#a3-edited

Now comment out the “(import(ProGeometry.dll)” script.  It can now be run as a Code Block of script, before the translation to Nodes takes place.

Geometry.Intersect#3

Geometry.Intersect#3

The preliminary translation is shown above, while the developed translation is shown below.

Geometry.Intersect#3a

Geometry.Intersect#3a

The red and yellow highlighted areas match the description and properties layout that is given to the script in the initial DS Editor *.ds file.

Geometry.Intersect#3b

Geometry.Intersect#3b

The “Node to Code” operation as shown above. A little editing is desired.

Geometry.Intersect#3b_edited

Geometry.Intersect#3b_edited

The geometry that results from the various code translations is shown below.

Geometry.Intersect#3a-Graphic Window

Geometry.Intersect#3a-Graphic Window

Liberty was taken with adding color as shown above in the graphic window.

DSS was run as a stand-alone application and the translation files are available to download from the DropBox links below.

Geometry.Intersect#a3

Geometry.Intersect#3

Geometry.Intersect#3a

Geometry.Intersect#3b

Thanks for looking.

T!M

#DesignScript -Geometry.ImportFromSat#2 – Code to Node to Code

Hi Everyone:

This is the second of six DesignScript translations, from the geometry category of the DS Editor (DSE) Samples.

Geometry.ImportFromSat-ds#2

Geometry.ImportFromSat-ds#2

Open the file Geometry.ImportFromSat.ds in the DS Editor and run it. The script is shown below.

Geometry.ImportFromSat.ds#2

Geometry.ImportFromSat.ds#2

Remember the last translation in which we exported a cube, entitled Geometry.ExportFromSat.ds? Well we are going to use that as the file we import for this  translation instead of the flower file.  The reason for that is primarily that the flower file is rather large and the computer I’m currently using for this is somewhat overwhelmed by it.

Go to the last file and save it to the root Directory where the file is saved and place it there.

Now  open DS Studio, copy & paste the DSE script, Geometry.ImportFromSat.ds into a blank canvas. Edit the script and replace “flower.sat” for “cube.sat”, also make sure that flower = is replaced with cube = .

Geometry.ImportFromSat#a2-alt

Geometry.ImportFromSat#a2-alt

Note the highlighted commenting out which must be deleted in order to activate the code.

Geometry.ImportFromSat#a2-alt-edited

Geometry.ImportFromSat#a2-alt-edited

Now comment out the “(import(ProGeometry.dll)” script.  It can now be run as a Code Block of script, before the translation to Nodes takes place.

Geometry.ImportFromSat#2-alt

Geometry.ImportFromSat#2-alt

The preliminary translation is shown above, while the developed translation is shown below.

Geometry.ImportFromSat#2a-alt

Geometry.ImportFromSat#2a-alt

The red and yellow highlighted areas match the description and properties layout that is given to the script in the initial DS Editor *.ds file.

Geometry.ImportFromSat#2b

Geometry.ImportFromSat#2b

The “Node to Code” operation as shown above. A little editing is desired.

Geometry.ImportFromSat#2b-edited

Geometry.ImportFromSat#2b-edited

The Geometry that is generated from the operation is shown below. Color was added for interest.

Geometry.ImportFromSat#2-Graphic Window

DSS was run as a stand-alone application and the translation files are available to download from the DropBox links below.

Geometry.ImportFromSat#a2

Geometry.ImportFromSat#2

Geometry.ImportFromSat#2a

Geometry.ImportFromSat#2b

Thanks for looking.

T!M

#DesignScript -Geometry.ExportToSat#1 – Code to Node to Code

Hi Everyone:

This is the first of six DesignScript translations, from the geometry category of the DS Editor (DSE) Samples

Geometry.ExportToSat-ds#1-

Geometry.ExportToSat-ds#1-

Open the file Geometry.ExportToSat.ds in the DS Editor and run it. The script is shown below.

Geometry.ExportToSat.ds#1

Geometry.ExportToSat.ds#1

 

Now open DS Studio, copy & paste the DSE script, Geometry.ExportToSat.ds into a blank canvas.

Geometry.ExportToSat#a1

Geometry.ExportToSat#a1

Note the highlighted commenting out which must be deleted in order to activate the code.

Geometry.ExportToSat#a1-edited

Geometry.ExportToSat#a1-edited

Now comment out the “(import(ProGeometry.dll)” script.  It can now be run as a Code Block of script, before the translation to Nodes takes place.

Geometry.ExportToSat#1

Geometry.ExportToSat#1

The preliminary translation is shown above, while the developed translation is shown below.

Geometry.ExportToSat#1a

The red and yellow highlighted areas match the description and properties layout that is given to the script in the initial DS Editor *.ds file.

Geometry.ExportToSat#1b

Geometry.ExportToSat#1b

The “Node to Code” operation as shown above. A little editing is desired.

Geometry.ExportToSat#1b-edited

Geometry.ExportToSat#1b-edited

The file should now  be exported to the  root directory where ones sample files reside. The Geometry that is generated from the operation is shown below.

Geometry.ExportToSat#1a Graphic Window

Geometry.ExportToSat#1a Graphic Window

DSS was run as a stand-alone application and the translation files are available to download from the DropBox links below.

Geometry.ExportToSat#a1

Geometry.ExportToSat#1

Geometry.ExportToSat#1a

Geometry.ExportToSat#1b

Thanks for looking.

T!M

#DesignScript -Vector.Op_Subtraction#7 – Code to Node to Code

Hi Everyone:

This is the last of seven DesignScript translations, from the Vector category of the DS Editor (DSE) Samples

Vector.Op_Subtraction-ds#7

Vector.Op_Subtraction-ds#7

Open the file Vector.Op_Subtraction.ds in the DS Editor and run it. The script is shown below.

Vector.Op_Subtraction.ds#7

Vector.Op_Subtraction.ds#7

Now open DS Studio, copy & paste the DSE script, Vector.Op_Subtraction.ds into a blank canvas.

Vector.Op_Subtraction#a7

Vector.Op_Subtraction#a7

Note the highlighted commenting out which must be deleted in order to activate the code.

Vector.Op_Subtraction#a7-edited

Vector.Op_Subtraction#a7-edited

Now comment out the “(import(ProGeometry.dll)” script.  It can now be run as a Code Block of script, before the translation to Nodes takes place.

Vector.Op_Subtraction#7

Vector.Op_Subtraction#7

The preliminary translation is shown above, while the developed translation is shown below.

Vector.Op_Subtraction#7a

Vector.Op_Subtraction#7a

The red and yellow highlighted areas match the description and properties layout that is given to the script in the initial DS Editor *.ds file.

Vector.Op_Subtraction#7b

Vector.Op_Subtraction#7b

The “Node to Code” operation as shown above. The geometry that results from the various code translations is shown below.

Vector.Op_Subtraction#7a-Graphic Window

Vector.Op_Subtraction#7a-Graphic Window

Liberty was taken with adding color as shown above in the graphic window.

DSS was run as a stand-alone application and the translation files are available to download from the DropBox links below.

Vector.Op_Subtraction#a7

Vector.Op_Subtraction#7

Vector.Op_Subtraction#7a

Vector.Op_Subtraction#7b

Thanks for looking.

T!M