Category Archives: RevolvedSurface

#DesignScript – Geometry.Surface.RevolvedSurface.ByProfileAxisOriginDirectionAngle#4- Code to Node to Code

 Hi Everyone:

This is the last, in a series of four DesignScript RevolvedSurface translations, from the Surface category of the DS Editor (DSE) Samples.

Geometry.Surface.RevolvedSurface.ByProfileAxisOriginDirectionAngle-ds#4

Geometry.Surface.RevolvedSurface.ByProfileAxisOriginDirectionAngle-ds#4

Open the file Geometry.Surface.RevolvedSurface.ByProfileAxisOriginDirectionAngle.ds, in the DS Editor and run it. The script is shown below.

Geometry.Surface.RevolvedSurface.ByProfileAxisOriginDirectionAngle.ds#4

Geometry.Surface.RevolvedSurface.ByProfileAxisOriginDirectionAngle.ds#4

Now open DS Studio, copy & paste the DSE script, Geometry.Surface.RevolvedSurface.ByProfileAxisOriginDirectionAngle.ds, into a blank canvas.

Geometry.Surface.RevolvedSurface.ByProfileAxisOriginDirectionAngle#a4

Geometry.Surface.RevolvedSurface.ByProfileAxisOriginDirectionAngle#a4

Note the highlighted commenting out which must be deleted in order to activate the code.

Geometry.Surface.RevolvedSurface.ByProfileAxisOriginDirectionAngle#a4-edited

Geometry.Surface.RevolvedSurface.ByProfileAxisOriginDirectionAngle#a4-edited

Now comment out the “(import(ProGeometry.dll)” script as highlighted above.  It can now be run as a Code Block of script, before the translation to Nodes takes place.

Geometry.Surface.RevolvedSurface.ByProfileAxisOriginDirectionAngle#4

Geometry.Surface.RevolvedSurface.ByProfileAxisOriginDirectionAngle#4

The preliminary translation is shown above, while the developed translation is shown below.

Geometry.Surface.RevolvedSurface.ByProfileAxisOriginDirectionAngle#4a

Geometry.Surface.RevolvedSurface.ByProfileAxisOriginDirectionAngle#4a

The red and yellow highlighted areas match the description and properties layout that is given to the script in the initial DS Editor *.ds file.

Geometry.Surface.RevolvedSurface.ByProfileAxisOriginDirectionAngle#4b

Geometry.Surface.RevolvedSurface.ByProfileAxisOriginDirectionAngle#4b

The “Node to Code” operation as shown above. The geometry that results from the various code translations is shown below.

Geometry.Surface.RevolvedSurface.ByProfileAxisOriginDirectionAngle#4-Graphic Window

Geometry.Surface.RevolvedSurface.ByProfileAxisOriginDirectionAngle#4-Graphic Window

Liberty was taken with making the color have some transparency as shown above in the graphic window.

DSS was run as a stand-alone application and the translation files are available to download from the DropBox links below.

Geometry.Surface.RevolvedSurface.ByProfileAxisOriginDirectionAngle#a4

Geometry.Surface.RevolvedSurface.ByProfileAxisOriginDirectionAngle#4

Geometry.Surface.RevolvedSurface.ByProfileAxisOriginDirectionAngle#4a

Geometry.Surface.RevolvedSurface.ByProfileAxisOriginDirectionAngle#4b

Thanks for looking.

T!M

Advertisements

#DesignScript – Geometry.Surface.RevolvedSurface.ByProfileAxisOriginDirection#3- Code to Node to Code

 Hi Everyone:

This is the third in a series of four DesignScript RevolvedSurface translations, from the Surface category of the DS Editor (DSE) Samples.

Geometry.Surface.RevolvedSurface.ByProfileAxisOriginDirection-ds#3

Geometry.Surface.RevolvedSurface.ByProfileAxisOriginDirection-ds#3

Open the file Geometry.Surface.RevolvedSurface.ByProfileAxisOriginDirection.ds, in the DS Editor and run it. The script is shown below.

Geometry.Surface.RevolvedSurface.ByProfileAxisOriginDirection.ds#3

Geometry.Surface.RevolvedSurface.ByProfileAxisOriginDirection.ds#3

Now open DS Studio, copy & paste the DSE script, Geometry.Surface.RevolvedSurface.ByProfileAxisOriginDirection.ds, into a blank canvas.

Geometry.Surface.RevolvedSurface.ByProfileAxisOriginDirection#a3-edited

Geometry.Surface.RevolvedSurface.ByProfileAxisOriginDirection#a3-edited

Note the highlighted commenting out which must be deleted in order to activate the code.

Geometry.Surface.RevolvedSurface.ByProfileAxisOriginDirection#a3-edited

Geometry.Surface.RevolvedSurface.ByProfileAxisOriginDirection#a3-edited

Now comment out the “(import(ProGeometry.dll)” script as highlighted above.  It can now be run as a Code Block of script, before the translation to Nodes takes place.

Geometry.Surface.RevolvedSurface.ByProfileAxisOriginDirection#3

Geometry.Surface.RevolvedSurface.ByProfileAxisOriginDirection#3

The preliminary translation is shown above, while the developed translation is shown below.

Geometry.Surface.RevolvedSurface.ByProfileAxisOriginDirection#3a_left

Geometry.Surface.RevolvedSurface.ByProfileAxisOriginDirection#3a_left

The red and yellow highlighted areas match the description and properties layout that is given to the script in the initial DS Editor *.ds file.

Geometry.Surface.RevolvedSurface.ByProfileAxisOriginDirection#3b

Geometry.Surface.RevolvedSurface.ByProfileAxisOriginDirection#3b

The “Node to Code” operation as shown above. The geometry that results from the various code translations is shown below.

Geometry.Surface.RevolvedSurface.ByProfileAxisOriginDirection#3-Graphic Window

Geometry.Surface.RevolvedSurface.ByProfileAxisOriginDirection#3-Graphic Window

Liberty was taken with making the color have some transparency as shown above in the graphic window.

DSS was run as a stand-alone application and the translation files are available to download from the DropBox links below.

Geometry.Surface.RevolvedSurface.ByProfileAxisOriginDirection#a3

Geometry.Surface.RevolvedSurface.ByProfileAxisOriginDirection#3

Geometry.Surface.RevolvedSurface.ByProfileAxisOriginDirection#3a

Geometry.Surface.RevolvedSurface.ByProfileAxisOriginDirection#3b

Thanks for looking.

T!M

#DesignScript – Geometry.Surface.RevolvedSurface.ByProfileAxisAngle#2- Code to Node to Code

 Hi Everyone:

This is the second of four DesignScript RevolvedSurface translations, from the Surface category of the DS Editor (DSE) Samples.

Geometry.Surface.RevolvedSurface.ByProfileAxisAngle-ds#2

Open the file Geometry.Surface.RevolvedSurface.ByProfileAxisAngle.ds, in the DS Editor and run it. The script is shown below.

Geometry.Surface.RevolvedSurface.ByProfileAxisAngle.ds#2

Geometry.Surface.RevolvedSurface.ByProfileAxisAngle.ds#2

Now open DS Studio, copy & paste the DSE script, Geometry.Surface.RevolvedSurface.ByProfileAxisAngle.ds, into a blank canvas.

Geometry.Surface.RevolvedSurface.ByProfileAxisAngle#a2

Geometry.Surface.RevolvedSurface.ByProfileAxisAngle#a2

Note the highlighted commenting out which must be deleted in order to activate the code.

Geometry.Surface.RevolvedSurface.ByProfileAxisAngle#a2-edited

Geometry.Surface.RevolvedSurface.ByProfileAxisAngle#a2-edited

Now comment out the “(import(ProGeometry.dll)” script as highlighted above.  It can now be run as a Code Block of script, before the translation to Nodes takes place.

Geometry.Surface.RevolvedSurface.ByProfileAxisAngle#2

Geometry.Surface.RevolvedSurface.ByProfileAxisAngle#2

The preliminary translation is shown above, while the developed translation is shown below.

Geometry.Surface.RevolvedSurface.ByProfileAxisAngle#a2-left-top

Geometry.Surface.RevolvedSurface.ByProfileAxisAngle#a2-left-top

The red and yellow highlighted areas match the description and properties layout that is given to the script in the initial DS Editor *.ds file.

Geometry.Surface.RevolvedSurface.ByProfileAxisAngle#2b

Geometry.Surface.RevolvedSurface.ByProfileAxisAngle#2b

The “Node to Code” operation as shown above. The geometry that results from the various code translations is shown below.

Geometry.Surface.RevolvedSurface.ByProfileAxisAngle#a2-Graphic Window

Geometry.Surface.RevolvedSurface.ByProfileAxisAngle#a2-Graphic Window

Liberty was taken with making the color have some transparency as shown above in the graphic window.

DSS was run as a stand-alone application and the translation files are available to download from the DropBox links below.

Geometry.Surface.RevolvedSurface.ByProfileAxisAngle#a2

Geometry.Surface.RevolvedSurface.ByProfileAxisAngle#2

Geometry.Surface.RevolvedSurface.ByProfileAxisAngle#2a

Geometry.Surface.RevolvedSurface.ByProfileAxisAngle#2b

Thanks for looking.

T!M

#DesignScript – Geometry.Surface.RevolvedSurface.ByProfileAxis#1- Code to Node to Code

 Hi Everyone:

This is a one of four DesignScript RevolvedSurface translations, from the Surface category of the DS Editor (DSE) Samples.

2014_09_10-Geometry.Surface.RevolvedSurface.ByProfileAxis-ds#1

2014_09_10-Geometry.Surface.RevolvedSurface.ByProfileAxis-ds#1

Open the file Geometry.Surface.RevolvedSurface.ByProfileAxis.ds, in the DS Editor and run it. The script is shown below.

Geometry.Surface.RevolvedSurface.ByProfileAxis.ds#1

Geometry.Surface.RevolvedSurface.ByProfileAxis.ds#1

Now open DS Studio, copy & paste the DSE script, Geometry.Surface.RevolvedSurface.ByProfileAxis.ds, into a blank canvas.

Geometry.Surface.RevolvedSurface.ByProfileAxis#a1

Geometry.Surface.RevolvedSurface.ByProfileAxis#a1

Note the highlighted commenting out which must be deleted in order to activate the code.

Geometry.Surface.RevolvedSurface.ByProfileAxis#a1-edited

Geometry.Surface.RevolvedSurface.ByProfileAxis#a1-edited

Now comment out the “(import(ProGeometry.dll)” script as highlighted above.  It can now be run as a Code Block of script, before the translation to Nodes takes place.

Geometry.Surface.RevolvedSurface.ByProfileAxis#1

Geometry.Surface.RevolvedSurface.ByProfileAxis#1

The preliminary translation is shown above, while the developed translation is shown below.

Geometry.Surface.RevolvedSurface.ByProfileAxis#1a

Geometry.Surface.RevolvedSurface.ByProfileAxis#1a

The red and yellow highlighted areas match the description and properties layout that is given to the script in the initial DS Editor *.ds file.

2014_09_10-Geometry.Surface.RevolvedSurface.ByProfileAxis#1b

2014_09_10-Geometry.Surface.RevolvedSurface.ByProfileAxis#1b

The “Node to Code” operation as shown above. The geometry that results from the various code translations is shown below.

Geometry.Surface.RevolvedSurface.ByProfileAxis-Graphic Window

Geometry.Surface.RevolvedSurface.ByProfileAxis-Graphic Window

Liberty was taken with making the color have some transparency as shown above in the graphic window.

DSS was run as a stand-alone application and the translation files are available to download from the DropBox links below.

Geometry.Surface.RevolvedSurface.ByProfileAxis#a1

Geometry.Surface.RevolvedSurface.ByProfileAxis#1

Geometry.Surface.RevolvedSurface.ByProfileAxis#1a

Geometry.Surface.RevolvedSurface.ByProfileAxis#1b

Thanks for looking.

T!M