Category Archives: Surface

#DesignScript – Geometry.Surface.Trim.UsingMultipleGeometries#29 – Code to Node to Code

Hi Everyone:

This is the twenty-ninth DesignScript Surface file by count and is the last Translation from the Surface category of the DS Editor (DSE) Samples, as shown below.

Geometry.Surface.Trim.UsingMultipleGeometries-ds#29

Geometry.Surface.Trim.UsingMultipleGeometries-ds#29

Open the file Geometry.Surface.Trim.UsingMultipleGeometries.ds, in the DS Editor and run it. The script is shown below.

Geometry.Surface.Trim.UsingMultipleGeometries.ds#29

Geometry.Surface.Trim.UsingMultipleGeometries.ds#29

Now open DS Studio, copy & paste the DSE script,Geometry.Surface.Trim.UsingMultipleGeometries.ds  into a blank canvas.

Geometry.Surface.Trim.UsingMultipleGeometries#a29

Geometry.Surface.Trim.UsingMultipleGeometries#a29

Note the highlighted commenting out which must be deleted in order to activate the code.

Geometry.Surface.Trim.UsingMultipleGeometries#a29-edited

Geometry.Surface.Trim.UsingMultipleGeometries#a29-edited

Now comment out the “(import(ProGeometry.dll)” script as highlighted above.  It can now be run as a Code Block of script, before the translation to Nodes takes place.

Geometry.Surface.Trim.UsingMultipleGeometries#29

Geometry.Surface.Trim.UsingMultipleGeometries#29

The preliminary translation is shown above, while the developed translation is shown below.

Geometry.Surface.Trim.UsingMultipleGeometries#29a

Geometry.Surface.Trim.UsingMultipleGeometries#29a

The red and yellow highlighted areas match the description and properties layout that is given to the script in the initial DS Editor *.ds file.

Geometry.Surface.Trim.UsingMultipleGeometries#29b

Geometry.Surface.Trim.UsingMultipleGeometries#29b

The “Node to Code” operation as shown above. A little editing is desired.

Geometry.Surface.Trim.UsingMultipleGeometries#29b-edited

Geometry.Surface.Trim.UsingMultipleGeometries#29b-edited

The geometry that results from the various code translations is shown below.

Geometry.Surface.Trim.UsingMultipleGeometries#29-Graphic Window

Geometry.Surface.Trim.UsingMultipleGeometries#29-Graphic Window

Liberty was taken with making the color have some transparency as shown above in the graphic window.

DSS was run as a stand-alone application and the translation files are available to download from the DropBox links below.

Geometry.Surface.Trim.UsingMultipleGeometries#a29

Geometry.Surface.Trim.UsingMultipleGeometries#29

Geometry.Surface.Trim.UsingMultipleGeometries#29a

Geometry.Surface.Trim.UsingMultipleGeometries#29b

Thanks for looking.

T!M

Advertisements

#DesignScript – Geometry.Surface.Trim.SingleSurface#28 – Code to Node to Code

Hi Everyone:

This is the twenty-eighth of twenty-eight DesignScript Surface files by count and should be the last, but it’s not. There is one more  translations – from the Surface category of the DS Editor (DSE) Samples, as shown below.

Geometry.Surface.Trim.SingleSurface-ds#28

Open the file Geometry.Surface.Trim.SingleSurface.ds, in the DS Editor and run it. The script is shown below.

Geometry.Surface.Trim.SingleSurface.ds#28

Geometry.Surface.Trim.SingleSurface.ds#28

Now open DS Studio, copy & paste the DSE script, Geometry.Surface.Trim.SingleSurface.ds, into a blank canvas.

Geometry.Surface.Trim.SingleSurface#a28

Geometry.Surface.Trim.SingleSurface#a28

Note the highlighted commenting out which must be deleted in order to activate the code.

Geometry.Surface.Trim.SingleSurface#a28-edited

Geometry.Surface.Trim.SingleSurface#a28-edited

Now comment out the “(import(ProGeometry.dll)” script as highlighted above.  It can now be run as a Code Block of script, before the translation to Nodes takes place.

Geometry.Surface.Trim.SingleSurface#28

Geometry.Surface.Trim.SingleSurface#28

The preliminary translation is shown above, while the developed translation is shown below.

Geometry.Surface.Trim.SingleSurface#28a

Geometry.Surface.Trim.SingleSurface#28a

The red and yellow highlighted areas match the description and properties layout that is given to the script in the initial DS Editor *.ds file.

Geometry.Surface.Trim.SingleSurface#28b

Geometry.Surface.Trim.SingleSurface#28b

The “Node to Code” operation as shown above. A little editing is desired.

Geometry.Surface.Trim.SingleSurface#28b-edited

Geometry.Surface.Trim.SingleSurface#28b-edited

The geometry that results from the various code translations is shown below.

Geometry.Surface.Trim.SingleSurface#28a-Graphic Window

Geometry.Surface.Trim.SingleSurface#28a-Graphic Window

Liberty was taken with making the color have some transparency as shown above in the graphic window.

DSS was run as a stand-alone application and the translation files are available to download from the DropBox links below.

Geometry.Surface.Trim.SingleSurface#a28

Geometry.Surface.Trim.SingleSurface#28

Geometry.Surface.Trim.SingleSurface#28a

Geometry.Surface.Trim.SingleSurface#28b

Thanks for looking.

T!M

#DesignScript – Geometry.Surface.Trim.SingleSolid#27 – Code to Node to Code

Hi Everyone:

This is the twenty-seventh of twenty-eight DesignScript Surface translations, from the Surface category of the DS Editor (DSE) Samples.

Geometry.Surface.Trim.SingleSolid-ds#27

Geometry.Surface.Trim.SingleSolid-ds#27

Open the file Geometry.Surface.Trim.SingleSolid.ds, in the DS Editor and run it. The script is shown below.

Geometry.Surface.Trim.SingleSolid.ds#27

Geometry.Surface.Trim.SingleSolid.ds#27

Now open DS Studio, copy & paste the DSE script, Geometry.Surface.Trim.SingleSolid.ds, into a blank canvas.

Geometry.Surface.Trim.SingleSolid#a27

Geometry.Surface.Trim.SingleSolid#a27

Note the highlighted commenting out which must be deleted in order to activate the code.

Geometry.Surface.Trim.SingleSolid#a27-edited

Geometry.Surface.Trim.SingleSolid#a27-edited

Now comment out the “(import(ProGeometry.dll)” script as highlighted above.  It can now be run as a Code Block of script, before the translation to Nodes takes place.

Geometry.Surface.Trim.SingleSolid#27

Geometry.Surface.Trim.SingleSolid#27

The preliminary translation is shown above, while the developed translation is shown below.

Geometry.Surface.Trim.SingleSolid#27a

Geometry.Surface.Trim.SingleSolid#27a

The red and yellow highlighted areas match the description and properties layout that is given to the script in the initial DS Editor *.ds file.

Geometry.Surface.Trim.SingleSolid#27b

Geometry.Surface.Trim.SingleSolid#27b

The “Node to Code” operation as shown above. A little editing is desired.

Geometry.Surface.Trim.SingleSolid#27b-edited

Geometry.Surface.Trim.SingleSolid#27b-edited

The geometry that results from the various code translations is shown below.

Geometry.Surface.Trim.SingleSolid#27a-Graphic Window2

Geometry.Surface.Trim.SingleSolid#27a-Graphic Window2

Liberty was taken with making the color have some transparency as shown above in the graphic window.

DSS was run as a stand-alone application and the translation files are available to download from the DropBox links below.

Geometry.Surface.Trim.SingleSolid#a27

Geometry.Surface.Trim.SingleSolid#27

Geometry.Surface.Trim.SingleSolid#27a

Geometry.Surface.Trim.SingleSolid#27b

Thanks for looking.

T!M

#DesignScript – Geometry.Surface.Trim.SinglePlane #26 – Code to Node to Code

Hi Everyone:

This is the twenty-sixth of twenty-eight DesignScript Surface translations, from the Surface category of the DS Editor (DSE) Samples.

Geometry.Surface.Trim.SinglePlane-ds#26

Geometry.Surface.Trim.SinglePlane-ds#26

Open the file Geometry.Surface.Trim.SinglePlane.ds, in the DS Editor and run it. The script is shown below.

Geometry.Surface.Trim.SinglePlane.ds#26

Geometry.Surface.Trim.SinglePlane.ds#26

Now open DS Studio, copy & paste the DSE script, Geometry.Surface.Trim.SinglePlane.ds, into a blank canvas.

Geometry.Surface.Trim.SinglePlane#a26

Geometry.Surface.Trim.SinglePlane#a26

Note the highlighted commenting out which must be deleted in order to activate the code.

Geometry.Surface.Trim.SinglePlane#a26-edited

Geometry.Surface.Trim.SinglePlane#a26-edited

Now comment out the “(import(ProGeometry.dll)” script as highlighted above.  It can now be run as a Code Block of script, before the translation to Nodes takes place.

Geometry.Surface.Trim.SinglePlane#26

Geometry.Surface.Trim.SinglePlane#26

The preliminary translation is shown above, while the developed translation is shown below.

Geometry.Surface.Trim.SinglePlane#26a

Geometry.Surface.Trim.SinglePlane#26a

The red and yellow highlighted areas match the description and properties layout that is given to the script in the initial DS Editor *.ds file.

Geometry.Surface.Trim.SinglePlane#26b

Geometry.Surface.Trim.SinglePlane#26b

The “Node to Code” operation as shown above. The geometry that results from the various code translations is shown below.

Geometry.Surface.Trim.SinglePlane#26a-Graphic Window

Geometry.Surface.Trim.SinglePlane#26a-Graphic Window

Liberty was taken with making the color have some transparency as shown above in the graphic window.

DSS was run as a stand-alone application and the translation files are available to download from the DropBox links below.

Geometry.Surface.Trim.SinglePlane#a26

Geometry.Surface.Trim.SinglePlane#26

Geometry.Surface.Trim.SinglePlane#26a

Geometry.Surface.Trim.SinglePlane#26b

Thanks for looking.

T!M

#DesignScript – Geometry.Surface.Trim.SingleCurve #25 – Code to Node to Code

Hi Everyone:

This is the twenty-fifth of twenty-eight DesignScript Surface translations, from the Surface category of the DS Editor (DSE) Samples.

Geometry.Surface.Trim.ArrayOfSurface-ds#24

Geometry.Surface.Trim.ArrayOfSurface-ds#24

Open the file Geometry.Surface.Trim.SingleCurveds, in the DS Editor and run it. The script is shown below.

Geometry.Surface.Trim.ArrayOfSurface.ds#24

Geometry.Surface.Trim.ArrayOfSurface.ds#24

Now open DS Studio, copy & paste the DSE script, Geometry.Surface.Trim.SingleCurveds, into a blank canvas.

Geometry.Surface.Trim.ArrayOfSurface#a24

Geometry.Surface.Trim.ArrayOfSurface#a24

Note the highlighted commenting out which must be deleted in order to activate the code.

Geometry.Surface.Trim.ArrayOfSurface#a24-edited

Geometry.Surface.Trim.ArrayOfSurface#a24-edited

Now comment out the “(import(ProGeometry.dll)” script as highlighted above.  It can now be run as a Code Block of script, before the translation to Nodes takes place.

Geometry.Surface.Trim.ArrayOfSurface#24

Geometry.Surface.Trim.ArrayOfSurface#24

The preliminary translation is shown above, while the developed translation is shown below.

Geometry.Surface.Trim.ArrayOfSurface#24a

Geometry.Surface.Trim.ArrayOfSurface#24a

The red and yellow highlighted areas match the description and properties layout that is given to the script in the initial DS Editor *.ds file.

Geometry.Surface.Trim.ArrayOfSurface#24b

Geometry.Surface.Trim.ArrayOfSurface#24b

The “Node to Code” operation as shown above. A little editing is desired.

Geometry.Surface.Trim.ArrayOfSurface#24b-edited

Geometry.Surface.Trim.ArrayOfSurface#24b-edited

The geometry that results from the various code translations is shown below.

Geometry.Surface.Trim.ArrayOfSurface#24a-Graphic Window

Geometry.Surface.Trim.ArrayOfSurface#24a-Graphic Window

Liberty was taken with making the color have some transparency as shown above in the graphic window.

DSS was run as a stand-alone application and the translation files are available to download from the DropBox links below.

Geometry.Surface.Trim.SingleCurve#a25

Geometry.Surface.Trim.SingleCurve#25

Geometry.Surface.Trim.SingleCurve#25a

Geometry.Surface.Trim.SingleCurve#25b

Thanks for looking.

T!M

#DesignScript – Geometry.Surface.Trim.ArrayOfSurface#24 – Code to Node to Code

Hi Everyone:

This is the twenty-fourth of twenty-eight DesignScript Surface translations, from the Surface category of the DS Editor (DSE) Samples.

Geometry.Surface.Trim.ArrayOfSurface-ds#24

Geometry.Surface.Trim.ArrayOfSurface-ds#24

Open the file Geometry.Surface.Trim.ArrayOfSurface.ds, in the DS Editor and run it. The script is shown below.

Geometry.Surface.Trim.ArrayOfSurface.ds#24

Geometry.Surface.Trim.ArrayOfSurface.ds#24

Now open DS Studio, copy & paste the DSE script, Geometry.Surface.Trim.ArrayOfSurface.ds, into a blank canvas.

Geometry.Surface.Trim.ArrayOfSurface#a24

Geometry.Surface.Trim.ArrayOfSurface#a24

Note the highlighted commenting out which must be deleted in order to activate the code.

Geometry.Surface.Trim.ArrayOfSurface#a24-edited

Geometry.Surface.Trim.ArrayOfSurface#a24-edited

Now comment out the “(import(ProGeometry.dll)” script as highlighted above.  It can now be run as a Code Block of script, before the translation to Nodes takes place.

Geometry.Surface.Trim.ArrayOfSurface#24

Geometry.Surface.Trim.ArrayOfSurface#24

The preliminary translation is shown above, while the developed translation is shown below.

Geometry.Surface.Trim.ArrayOfSurface#24a

Geometry.Surface.Trim.ArrayOfSurface#24a

The red and yellow highlighted areas match the description and properties layout that is given to the script in the initial DS Editor *.ds file.

Geometry.Surface.Trim.ArrayOfSurface#24b

Geometry.Surface.Trim.ArrayOfSurface#24b

The “Node to Code” operation as shown above. A little editing is desired.

Geometry.Surface.Trim.ArrayOfSurface#24b-edited

Geometry.Surface.Trim.ArrayOfSurface#24b-edited

The geometry that results from the various code translations is shown below.

Geometry.Surface.Trim.ArrayOfSurface#24a-Graphic Window

Geometry.Surface.Trim.ArrayOfSurface#24a-Graphic Window

Liberty was taken with making the color have some transparency as shown above in the graphic window.

DSS was run as a stand-alone application and the translation files are available to download from the DropBox links below.

Geometry.Surface.Trim.ArrayOfSurface#a24

Geometry.Surface.Trim.ArrayOfSurface#24

Geometry.Surface.Trim.ArrayOfSurface#24a

Geometry.Surface.Trim.ArrayOfSurface#24b

Thanks for looking.

T!M

#DesignScript – Geometry.Surface.Trim.ArrayOfSolids#23 – Code to Node to Code

Hi Everyone:

This is the twenty-third of twenty-eight DesignScript Surface translations, from the Surface category of the DS Editor (DSE) Samples.

Geometry.Surface.Trim.ArrayOfSolids-ds#23

Geometry.Surface.Trim.ArrayOfSolids-ds#23

Open the file Geometry.Surface.Trim.ArrayOfSolids.ds, in the DS Editor and run it. The script is shown below.

Geometry.Surface.Trim.ArrayOfSolids.ds#23

Geometry.Surface.Trim.ArrayOfSolids.ds#23

Now open DS Studio, copy & paste the DSE script, Geometry.Surface.Trim.ArrayOfSolids.ds, into a blank canvas.

Geometry.Surface.Trim.ArrayOfSolids#a23

Geometry.Surface.Trim.ArrayOfSolids#a23

Note the highlighted commenting out which must be deleted in order to activate the code.

Geometry.Surface.Trim.ArrayOfSolids#a23-edited

Geometry.Surface.Trim.ArrayOfSolids#a23-edited

Now comment out the “(import(ProGeometry.dll)” script as highlighted above.  It can now be run as a Code Block of script, before the translation to Nodes takes place.

Geometry.Surface.Trim.ArrayOfSolids#23

Geometry.Surface.Trim.ArrayOfSolids#23

The preliminary translation is shown above, while the developed translation is shown below.

Geometry.Surface.Trim.ArrayOfSolids#23a

Geometry.Surface.Trim.ArrayOfSolids#23a

The red and yellow highlighted areas match the description and properties layout that is given to the script in the initial DS Editor *.ds file.

 

 

Geometry.Surface.Trim.ArrayOfSolids#23b

Geometry.Surface.Trim.ArrayOfSolids#23b

The “Node to Code” operation as shown above. A little editing is desired.

Geometry.Surface.Trim.ArrayOfSolids#23b-edited

Geometry.Surface.Trim.ArrayOfSolids#23b-edited

The geometry that results from the various code translations is shown below.

Geometry.Surface.Trim.ArrayOfSolids#23a-Graphic Window

Geometry.Surface.Trim.ArrayOfSolids#23a-Graphic Window

Liberty was taken with making the color have some transparency as shown above in the graphic window.

DSS was run as a stand-alone application and the translation files are available to download from the DropBox links below.

Geometry.Surface.Trim.ArrayOfSolids#a23

Geometry.Surface.Trim.ArrayOfSolids#23

Geometry.Surface.Trim.ArrayOfSolids#23a

Geometry.Surface.Trim.ArrayOfSolids#23b

Thanks for looking.

T!M