Monthly Archives: August 2014

#DesignScript Curve Translation,Geometry.Solid.Union.NonManifold.ArrayOfSolid#29- Code to Node to Code

Hi Everyone:

This is the twenty-ninth in a series of thirty-two DS file translations. The file, Geometry.Solid.Union.NonManifold.ArrayOfSolid.ds, is the second in a series of five Union-Solid file types from the DesignScript Editor (DSE) Samples.

Geometry.Solid.Union.NonManifold.ArrayOfSolids_ds#29

Geometry.Solid.Union.NonManifold.ArrayOfSolids_ds#29

Open the file Geometry.Solid.Union.NonManifold.ArrayOfSolid.ds, in the DS Editor and run it. The script is shown below.

Geometry.Solid.Union.NonManifold.ArrayOfSolids.ds#29

Geometry.Solid.Union.NonManifold.ArrayOfSolids.ds#29

Now open DS Studio, and paste the DSE script, Geometry.Solid.Union.NonManifold.ArrayOfSolid.ds, into a blank canvas.

Geometry.Solid.Union.NonManifold.ArrayOfSolids#a29

Geometry.Solid.Union.NonManifold.ArrayOfSolids#a29

Note the highlighted commenting out which must be deleted in order to activate the code.

Geometry.Solid.Union.NonManifold.ArrayOfSolids#a29-edited

Geometry.Solid.Union.NonManifold.ArrayOfSolids#a29-edited

Now commenting out the “(import(ProGeometry.dll)” script as highlighted above must be added. It can now be run as a Code Block of script, before the translation to Nodes takes place.

Geometry.Solid.Union.NonManifold.ArrayOfSolids#29

Geometry.Solid.Union.NonManifold.ArrayOfSolids#29

The preliminary translation is shown above, while the developed translation is shown below.

Geometry.Solid.Union.NonManifold.ArrayOfSolids#29a

Geometry.Solid.Union.NonManifold.ArrayOfSolids#29a

 

The red and yellow highlighted areas match the description and properties layout that is given to the script in the initial DS Editor *.ds file.

Geometry.Solid.Union.NonManifold.ArrayOfSolids#29b

Geometry.Solid.Union.NonManifold.ArrayOfSolids#29b

The “Node to Code” operation as shown above and a little editing as highlighted is desired.

Geometry.Solid.Union.NonManifold.ArrayOfSolids#29b-edited

Geometry.Solid.Union.NonManifold.ArrayOfSolids#29b-edited

The geometry that results from the various code translations is shown below.

Geometry.Solid.Union.NonManifold.ArrayOfSolids#29a_WindowsGraphic

Geometry.Solid.Union.NonManifold.ArrayOfSolids#29a_WindowsGraphic

Liberty was taken with making the color have some transparency as shown above in the graphic window.

DSS was run as a stand-alone application and the translation files are available to download from the DropBox links below.

Geometry.Solid.Union.NonManifold.ArrayOfSolid#a29

Geometry.Solid.Union.NonManifold.ArrayOfSolid#29

Geometry.Solid.Union.NonManifold.ArrayOfSolid#29a

Geometry.Solid.Union.NonManifold.ArrayOfSolid#29b

Thanks for looking.

T!M

Advertisements

#DesignScript Curve Translation,Geometry.Solid.Union.ArrayOfSolids#28- Code to Node to Code

Hi Everyone:

This is the twenty-eighth in a series of thirty-two DS file translations. The file, Geometry.Solid.Union.ArrayOfSolids.ds, is the first  in a series of five Union-Solid file types from the DesignScript Editor (DSE) Samples.

Geometry.Solid.Union.ArrayOfSolids-ds#28

Geometry.Solid.Union.ArrayOfSolids-ds#28

Open the file Geometry.Solid.Union.ArrayOfSolids.ds in the DS Editor and run it. The script is shown below.

Geometry.Solid.Union.ArrayOfSolids.ds#28

Geometry.Solid.Union.ArrayOfSolids.ds#28

Now open DS Studio, and paste the DSE script, Geometry.Solid.Union.ArrayOfSolids.ds into a blank canvas.

Geometry.Solid.Union.ArrayOfSolids#a28

Geometry.Solid.Union.ArrayOfSolids#a28

Note the highlighted commenting out which must be deleted in order to activate the code.

Geometry.Solid.Union.ArrayOfSolids#a28-edited

Geometry.Solid.Union.ArrayOfSolids#a28-edited

Now commenting out the “(import(ProGeometry.dll)” script as highlighted above must be added. It can now be run as a Code Block of script, before the translation to Nodes takes place.

Geometry.Solid.Union.ArrayOfSolids#28

Geometry.Solid.Union.ArrayOfSolids#28

The preliminary translation is shown above, while the developed translation is shown below.

Geometry.Solid.Union.ArrayOfSolids#28a

Geometry.Solid.Union.ArrayOfSolids#28a

The red and yellow highlighted areas match the description and properties layout that is given to the script in the initial DS Editor *.ds file.

Geometry.Solid.Union.ArrayOfSolids#28b

Geometry.Solid.Union.ArrayOfSolids#28b

The “Node to Code” operation as shown above and editing is not required. The geometry that results from the various code translations is shown below.

Geometry.Solid.Union.ArrayOfSolids#28-Windows Graphic

Geometry.Solid.Union.ArrayOfSolids#28-Windows Graphic

Liberty was taken with adding additional colors and to give them transparency as shown above in the graphic window. DSS was run as a stand-alone application and the translation files are available to download from the DropBox links below.

Geometry.Solid.Union.ArrayOfSolids#a28

Geometry.Solid.Union.ArrayOfSolids#28

Geometry.Solid.Union.ArrayOfSolids#28a

Geometry.Solid.Union.ArrayOfSolids#28b

Thanks for looking.

T!M

#DesignScript Curve Translation,Geometry.Solid.Trim.SingleSurface#27- Code to Node to Code

Hi Everyone:

This is the twenty-seventh in a series of thirty-two DS file translations. The file, Geometry.Solid.Trim.SingleSurface.ds, is the last of six trim files located in the DesignScript Editor (DSE) Sample files.

Geometry.Solid.Trim.SingleSurface-ds#27

Geometry.Solid.Trim.SingleSurface-ds#27

Open the file Geometry.Solid.Trim.SingleSurface.ds in the DS Editor and run it. The script is shown below.

Geometry.Solid.Trim.SingleSurface.ds#27

Geometry.Solid.Trim.SingleSurface.ds#27

Now open DS Studio, and paste the DSE script, Geometry.Solid.Trim.SingleSurface.ds into a blank canvas.

Geometry.Solid.Trim.SingleSurface#a27

Geometry.Solid.Trim.SingleSurface#a27

Note the highlighted commenting out which must be deleted in order to activate the code.

Geometry.Solid.Trim.SingleSurface#a27-edited

Geometry.Solid.Trim.SingleSurface#a27-edited

Now commenting out the “(import(ProGeometry.dll)” script as highlighted above must be added. It can now be run as a Code Block of script, before the translation to Nodes takes place.

Geometry.Solid.Trim.SingleSurface#27

Geometry.Solid.Trim.SingleSurface#27

The preliminary translation is shown above, while the developed translation is shown below.

Geometry.Solid.Trim.SingleSurface#27a

Geometry.Solid.Trim.SingleSurface#27a

The red and yellow highlighted areas match the description and properties layout that is given to the script in the initial DS Editor *.ds file.

Geometry.Solid.Trim.SingleSurface#27b

Geometry.Solid.Trim.SingleSurface#27b

The “Node to Code” operation as shown above and editing is not required. The geometry that results from the various code translations is shown below.

Geometry.Solid.Trim.SingleSurface#27-Windows Graphic

Geometry.Solid.Trim.SingleSurface#27-Windows Graphic

Liberty was taken with adding additional colors and to give them transparency as shown above in the graphic window. DSS was run as a stand-alone application and the translation files are available to download from the DropBox links below.

Geometry.Solid.Trim.SingleSurface#a27

Geometry.Solid.Trim.SingleSurface#27

Geometry.Solid.Trim.SingleSurface#27a

Geometry.Solid.Trim.SingleSurface#27b

Thanks for looking.

T!M

#DesignScript Curve Translation,Geometry.Solid.Trim.SingleSolid#26- Code to Node to Code

Hi Everyone:

This is the twenty-sixth in a series of thirty-two DS file translations. The file, Geometry.Solid.Trim.SingleSolid.ds, is the fifth of six trim files located in the DesignScript Editor (DSE) Sample files.

Geometry.Solid.Trim.SingleSolid-ds#26

Open the file Geometry.Solid.Trim.SingleSolid.ds in the DS Editor and run it. The script is shown below.

Geometry.Solid.Trim.SingleSolid.ds#26

Geometry.Solid.Trim.SingleSolid.ds#26

Now open DS Studio, and paste the DSE script, Geometry.Solid.Trim.SingleSolid.ds into a blank canvas.

Geometry.Solid.Trim.SingleSolid#a26

Geometry.Solid.Trim.SingleSolid#a26

Note the highlighted commenting out which must be deleted in order to activate the code.

Geometry.Solid.Trim.SingleSolid#a26-edited

Geometry.Solid.Trim.SingleSolid#a26-edited

Now commenting out the “(import(ProGeometry.dll)” script as highlighted above must be added. It can now be run as a Code Block of script, before the translation to Nodes takes place.

Geometry.Solid.Trim.SingleSolid#26

Geometry.Solid.Trim.SingleSolid#26

The preliminary translation is shown above, while the developed translation is shown below.

Geometry.Solid.Trim.SingleSolid#26a

Geometry.Solid.Trim.SingleSolid#26a

The red and yellow highlighted areas match the description and properties layout that is given to the script in the initial DS Editor *.ds file.

Geometry.Solid.Trim.SingleSolid#26b

Geometry.Solid.Trim.SingleSolid#26b

The “Node to Code” operation as shown above and editing is not required. The geometry that results from the various code translations is shown below.

Geometry.Solid.Trim.SingleSolid-windows graphic

Geometry.Solid.Trim.SingleSolid-windows graphic

Liberty was taken with adding additional colors and to give them transparency as shown above in the graphic window. DSS was run as a stand-alone application and the translation files are available to download from the DropBox links below.

Geometry.Solid.Trim.SingleSolid#a26

Geometry.Solid.Trim.SingleSolid#26

Geometry.Solid.Trim.SingleSolid#26a

Geometry.Solid.Trim.SingleSolid#26b

Thanks for looking.

T!M

#DesignScript Curve Translation,Geometry.Solid.Trim.SinglePlane#25- Code to Node to Code

Hi Everyone:

This is the twenty-fifth in a series of thirty-two DS file translations. The file, Geometry.Solid.Trim.SinglePlane.ds, is the fourth of six trim files located in the DesignScript Editor (DSE) Sample files.

Geometry.Solid.Trim.SinglePlane-ds#25

Geometry.Solid.Trim.SinglePlane-ds#25

Open the file Geometry.Solid.Trim.SinglePlane.ds in the DS Editor and run it. The script is shown below.

Geometry.Solid.Trim.SinglePlane.ds#25

Geometry.Solid.Trim.SinglePlane.ds#25

Now open DS Studio, and paste the DSE script, Geometry.Solid.Trim.SinglePlane.ds, into a blank canvas.

Geometry.Solid.Trim.SinglePlane#a25

Geometry.Solid.Trim.SinglePlane#a25

Note the highlighted commenting out which must be deleted in order to activate the code.

Geometry.Solid.Trim.SinglePlane#a25-edited

Geometry.Solid.Trim.SinglePlane#a25-edited

Now commenting out the “(import(ProGeometry.dll)” script as highlighted above must be added. It can now be run as a Code Block of script, before the translation to Nodes takes place.

Geometry.Solid.Trim.SinglePlane#25

Geometry.Solid.Trim.SinglePlane#25

The preliminary translation is shown above, while the developed translation is shown below.

Geometry.Solid.Trim.SinglePlane#25a

Geometry.Solid.Trim.SinglePlane#25a

The red and yellow highlighted areas match the description and properties layout that is given to the script in the initial DS Editor *.ds file.

Geometry.Solid.Trim.SinglePlane#25b

Geometry.Solid.Trim.SinglePlane#25b

The “Node to Code” operation as shown above and editing is not required. The geometry that results from the various code translations is shown below.

Geometry.Solid.Trim.SinglePlane_Graphic Window

Geometry.Solid.Trim.SinglePlane_Graphic Window

Liberty was taken with adding additional colors and to give them transparency as shown above in the graphic window. DSS was run as a stand-alone application and the translation files are available to download from the DropBox links below.

Geometry.Solid.Trim.SinglePlane#a25

Geometry.Solid.Trim.SinglePlane#25

Geometry.Solid.Trim.SinglePlane#25a

Geometry.Solid.Trim.SinglePlane#25b

Thanks for looking.

T!M

#DesignScript Curve Translation,Geometry.Solid.Trim.ArrayOfSurface#24- Code to Node to Code

Hi Everyone:

This is the twenty-fourth in a series of thirty-two DS file translations. The file Geometry.Solid.Trim.ArrayOfSurface.ds is the third of six trim files located in the DesignScript Editor (DSE) Sample files.

Geometry.Solid.Trim.ArrayOfSurface-ds#24

Geometry.Solid.Trim.ArrayOfSurface-ds#24

Open the file Geometry.Solid.Trim.ArrayOfSurface.ds in the DS Editor and run it, The  script is shown below.

Geometry.Solid.Trim.ArrayOfSurface.ds#24

Geometry.Solid.Trim.ArrayOfSurface.ds#24

Now open DS Studio, and paste the DSE script, Geometry.Solid.Trim.ArrayOfSurface.ds , into a blank canvas.

Geometry.Solid.Trim.ArrayOfSurface#a24

Geometry.Solid.Trim.ArrayOfSurface#a24

Note the commenting out which must be deleted in order to activate the code.

Geometry.Solid.Trim.ArrayOfSurface#a24-edited

Geometry.Solid.Trim.ArrayOfSurface#a24-edited

Now commenting out the “(import(ProGeometry.dll)” script as highlighted above must be added. It can now be run as a Code Block of script, before the translation to Nodes takes place.

Geometry.Solid.Trim.ArrayOfSurface#24

Geometry.Solid.Trim.ArrayOfSurface#24

The preliminary translation is shown above, while the developed translation is shown below.

Geometry.Solid.Trim.ArrayOfSurface#24a

Geometry.Solid.Trim.ArrayOfSurface#24a

The red and yellow highlighted areas match the description and properties layout that is given to the script in the initial DS Editor *.ds file.

Geometry.Solid.Trim.ArrayOfSurface#24b-rev

Geometry.Solid.Trim.ArrayOfSurface#24b-rev

The “Node to Code” operation as shown above and editing is not required. The geometry that results from the various code translations is shown below.

Geometry.Solid.Trim.ArrayOfSurface-Graphic Window

Geometry.Solid.Trim.ArrayOfSurface-Graphic Window

Liberty was taken with adding additional colors and to give them transparency as shown above in the graphic window. DSS was run as a stand-alone application and the translation files are available to download from the DropBox links below.

Geometry.Solid.Trim.ArrayOfSurface#a24

Geometry.Solid.Trim.ArrayOfSurface#24

Geometry.Solid.Trim.ArrayOfSurface#24a

Geometry.Solid.Trim.ArrayOfSurface#24b

Thanks for looking.

T!M

#DesignScript Curve Translation,Geometry.Solid.Trim.ArrayOfSolid#23- Code to Node to Code

Hi Everyone:

This is the twenty-third in a series of thirty-two DS file translations. The file Geometry.Solid.Trim.ArrayOfSolid.ds is the second of six trim files located in the DesignScript Editor (DSE) Sample files.

Geometry.Solid.Trim.ArrayOfSolid-ds#23

Geometry.Solid.Trim.ArrayOfSolid-ds#23

Open the file  Geometry.Solid.Trim.ArrayOfSolid.ds in the DS Editor and run it, The  script is shown below.

Geometry.Solid.Trim.ArrayOfSolid.ds#23

Geometry.Solid.Trim.ArrayOfSolid.ds#23

Now open DS Studio, and paste the DSE script, Geometry.Solid.Trim.ArrayOfSolid.ds, into a blank canvas.

Geometry.Solid.Trim.ArrayOfSolid#a23

Geometry.Solid.Trim.ArrayOfSolid#a23

Note the commenting out which must be deleted in order to activate the code.

Geometry.Solid.Trim.ArrayOfSolid#a23-edited

Geometry.Solid.Trim.ArrayOfSolid#a23-edited

Now commenting out the “(import(ProGeometry.dll)” script as highlighted above must be added. It can now be run as a Code Block of script, before the translation to Nodes takes place.

Geometry.Solid.Trim.ArrayOfSolid#23

Geometry.Solid.Trim.ArrayOfSolid#23

The preliminary translation is shown above, while the developed translation is shown below.

Geometry.Solid.Trim.ArrayOfSolid#23a

Geometry.Solid.Trim.ArrayOfSolid#23a

The red and yellow highlighted areas match the description and properties layout that is given to the script in the initial DS Editor *.ds file.

Geometry.Solid.Trim.ArrayOfSolid#23b

Geometry.Solid.Trim.ArrayOfSolid#23b

Continuing with the “Node to Code” operation as shown above, a little editing is required.

Geometry.Solid.Trim.ArrayOfSolid#23b-edited

Geometry.Solid.Trim.ArrayOfSolid#23b-edited

The geometry that results from the various code translations is shown below.

Geometry.Solid.Trim.ArrayOfSolid#23- Graphic window

Geometry.Solid.Trim.ArrayOfSolid#23- Graphic window

Liberty was taken with adding additional colors and to give them transparency as shown above in the graphic window. DSS was run as a stand-alone application and the translation files are available to download from the DropBox links below.

Geometry.Solid.Trim.ArrayOfSolid#a23

Geometry.Solid.Trim.ArrayOfSolid#23

Geometry.Solid.Trim.ArrayOfSolid#23a

Geometry.Solid.Trim.ArrayOfSolid#23b

Thanks for looking.

T!M